home


DYEING & PRINTING AUXILIARIES

1.) LUXITEX 221 :
Luxitex 221 is a low foaming lubricating agent to prevent creasing of fabrics during wet processing

2.) LUXITEX 222 :
An antimigrating agent developed mainly for dyeing of GROUND SHADES (to be resist printed subsequently) on mangle using the 'PAD-DRY' range. The product has proved very useful in avoiding face to face or centre to selvedge type of uneven effects obtained due to differential heating zones of drying range. It has been observed that many times differences in temperature and channeling of air circulation set in drying range, causes uneven drying. The product is very useful to minimise the defect caused by such eneven drying conditions.


3.) LUXITEX 223 :

An excellent anti-back staining agent to be used in various garment processing.


4.) LUXITEX 231 :

A very good Resist printing agent for printing of Reactive dyes (di chloro cyanuric type e.g. Procion dyes of H series) as illuminating colours, under reactive dyes (Vinyl Sulphone type e.g. Remazol dyes) as ground colours. Dark colours like black, coffee, olive green, navy etc. can be used as ground shades and bright red, orange, yellow, crimsons etc. can be overprinted as illuminating shades.

   

5.) LUXITEX 232 :
Luxitex 232 is a fading agent which gives stone wash effect on Reactive, Direct and Sulphur dyed cotton garment, similar to that of enzyme treated cotton garments.

6.) LUXITEX 252 :
Luxitex 252 is a very good wetting and penetrating agent for polyamide and polyacrylic fabric printing.

7.) LUXITEX 255 :

Cone Products as dye accelerator for developing disperse colour prints on polyester by loop steaming/thermofixing. This can also be used for levelling when printed goods are to be developed by HTHP steaming.

8.) LUXITEX 259 :
Best accelerator for developing disperse colour printed polyester materials by loop steaming / thermofixing. The addition of Luxitex 259 gives 15 to 25% higher colour value depending upon the chemical nature of the colour. Luxitex 259 is a useful tool for improved levelling when printed goods are to be developed by HTHP steaming & for dyeing by 'Pad-Dry-Develop' method.

9.) LUXITEX 264 :
Luxitex 264 is the best accelerator for developing acid / metal complex colour prints on polyamide / silk / acrylic fabrics.

10.) LUXITEX 284 :
Luxitex 284 is an unique Eco-friendly product which gives printing effect with reactive cold brand colour by dyeing method ( without steaming ).

11.) LUXITEX 290 :
Luxitex 290 is an Anti-backstaining agent used in enzyme desizing and biopolishing of indigo dyed fabrics to prevent back-staining on white cotton & polyester component.

12.) LUXITEX 439:
Cost effective one bath auxiliary for printing polyester with disperse colour. Luxited 439 is a good accelerator for developing disperse colour printed polyester materials by loop steaming / thermofixing. The addition of Luxited 439 gives excellent penetration & levelling effect in printing. In orinting high twist material, spun by texturised material etc, Luxitex 439 serves as the important tool to produce bright, level prints.

back

 

 

 

 

 

 

 

profile home products contact